পণ্যের বিবরণ

বাড়ি > পণ্য >

সিএনসি যান্ত্রিক যন্ত্রাংশ

CNC Machined C11000 ETP Copper Battery Terminal Connector with Low Contact Resistance for BESS Energy Storage Systems

সকল বিভাগ

সিএনসি অ্যালুমিনিয়াম যন্ত্রাংশ

CNC ম্যানুফ্যাকচারিং সলিউশনস

আমাদের সাথে যোগাযোগ

Mrs. Yang

kristen.yang@jinbo-china.com

+86 13798898651

Y13798898651

এখনই যোগাযোগ করুন

CNC Machined C11000 ETP Copper Battery Terminal Connector with Low Contact Resistance for BESS Energy Storage Systems

বিস্তারিত তথ্য

পণ্যের বর্ণনা

বিস্তারিত তথ্য

উপাদান:

C11000 ETP কপার

বর্তমান রেটিং:

200A - 500A একটানা, 1000A+ সার্জ

যোগাযোগ প্রতিরোধ:

<0.5 মিলিওহম

সারফেস ট্রিটমেন্ট:

টিন ধাতুপট্টাবৃত (3-5um), সিলভার ধাতুপট্টাবৃত (2-3um)

অপারেটিং তাপমাত্রা:

-40C থেকে +85C

থ্রেড সহনশীলতা:

ক্লাস 6H

পণ্যের বর্ণনা

CNC Machined Battery Terminal Connector for BESS Energy Storage Systems

Battery terminal connectors are critical components that appear simple but require precise material selection and plating to ensure reliability. We've witnessed failures where non-uniform plating thickness and porous copper substrates led to conductivity issues in field applications, potentially idling expensive battery racks due to inexpensive connector failures.

Battery terminal connectors in BESS (Battery Energy Storage Systems) handle substantial currents—200A to 500A continuous, with surge currents exceeding 1,000A during charge/discharge cycles. The resulting I²R heating demands connectors with low contact resistance (sub-milliohm), excellent thermal conductivity, and mechanical strength to maintain consistent clamping force over 10-15 years of thermal cycling.

Our connectors are machined from C11000 ETP copper bar stock rather than castings. Extruded copper bar provides consistent grain structure with zero porosity, ensuring predictable conductivity and eliminating weak points. Contact surfaces are maintained at Ra 1.6 or better—smooth enough for reliable electrical contact while maintaining grip. Plating options include tin (3-5 microns) or silver (2-3 microns) based on corrosion environment and budget requirements.

Comprehensive inspection is crucial. Beyond dimensional measurements, we conduct contact resistance testing using 4-wire Kelvin measurement, verify plating thickness with XRF, and perform pull-tests on bolt holes to ensure they withstand installation torque. These steps, often skipped by other manufacturers, prevent field failures in critical BESS installations.

Key Features

C11000 ETP Copper Substrate: 101% IACS minimum conductivity from certified mills with full material certificates. No recycled copper or substitutions unless specifically required for hydrogen environments.
Precision Threaded Holes: M6, M8, M10, or custom thread sizes with Class 6H tolerance. Threads are gauged with GO/NO-GO thread plug gauges on every production run to prevent loose connections and fire risks.
Low Contact Resistance: <0.5 milliohm at rated current, verified by 4-wire Kelvin measurement. Surface finish Ra 1.6 on contact faces.
Plating Options: Electrolytic tin (3-5μm) for general BESS applications, silver (2-3μm) for high-cycle or high-current applications, or nickel barrier + tin for marine/coastal environments. XRF verification on every batch.
Thermal Cycling Rated: Designed for -40°C to +85°C operating range with 500+ thermal cycles. Copper's CTE matches battery busbars, maintaining tight connections through daily charge/discharge cycles.

Technical Specifications

Specification	Details
Product Name	CNC Machined Battery Terminal Connector for BESS
Material Options	C11000 ETP Copper, C10200 OFHC Copper, Cu-Zn Brass (C36000)
Tolerance	±0.05mm (standard), ±0.01mm (threaded features)
Current Rating	200A - 500A continuous, 1000A+ surge
Contact Resistance	<0.5 milliohm (verified by 4-wire Kelvin)
Surface Treatment	Tin plated (3-5μm), Silver plated (2-3μm), Nickel + Tin, Bare copper
Certifications	ISO 9001:2015, IATF 16949, RoHS, CE, REACH
Lead Time - Prototype	3-7 days
Lead Time - Production	7-15 days
MOQ	1 piece (prototype), 100+ (production)
Origin	Dongguan, China

Applications

Battery Energy Storage Systems (BESS): Module-to-busbar connections, rack-level busbar links, DC disconnect terminal blocks, series/parallel battery string connectors
EV Charging Infrastructure: DC fast charger power connections, charging station battery terminals, power distribution bus links
Solar Energy Systems: PV inverter DC input terminals, battery bank connections, combiner box bus terminals
UPS Systems: Battery bank terminal connectors, DC busbar links, power distribution block connections
Telecom Power: 48V DC power distribution terminals, battery backup system connectors, rectifier output bus connections
Industrial Battery Systems: Forklift battery terminals, AGV battery connectors, backup power system links

Why Choose Sinbo Precision

Copper Machining Experience: Daily expertise machining copper components using sharp tools, high rake angles, flood coolant, and light cuts to prevent burrs, tear-out, and surface contamination.
Electrical Testing Capability: Comprehensive testing including 4-wire Kelvin contact resistance measurement, insulation resistance testing, and dielectric withstanding voltage testing.
Plating Partner Network: Collaboration with certified plating shops providing tin, silver, nickel, and gold options with XRF thickness verification and certificates.
Battery Industry Knowledge: Understanding of standards (UL 1973, IEC 62619), failure modes (thermal cycling, creep, corrosion), and testing requirements for BESS integrators and EV charging companies.
Prototype to Production: Consistent process control and inspection criteria from 1-piece prototypes to 10,000+ volume production.
Full Traceability: Comprehensive documentation including material certificates, plating thickness reports, dimensional inspection records, and electrical test data archived for 10+ years.

Manufacturing Process

Design Review: Analysis of terminal geometry for manufacturability including minimum wall thickness, thread depth-to-diameter ratio, copper grain orientation, and plating mask requirements.
Material Procurement: Sourcing C11000 ETP copper bar stock from certified domestic mills with complete material certificates.
CNC Machining: Precision milling, turning, drilling, and tapping using carbide tooling with high positive rake and flood coolant to prevent copper galling and work hardening.
Deburring & Cleaning: Edge breaking and deburring followed by ultrasonic cleaning to remove machining oils and copper chips for optimal plating adhesion.
Plating: Outsourcing to certified plating partners for electrolytic tin (3-5μm) or silver (2-3μm) with XRF thickness verification and ASTM B571 adhesion testing.
Inspection & Testing: Comprehensive quality control including CMM dimensional checks, thread gauging, 4-wire Kelvin contact resistance measurement, visual inspection, and plating thickness verification.

Frequently Asked Questions

What copper grade do you recommend for battery terminals?

C11000 ETP for 95% of BESS applications. It offers 101% IACS conductivity, ready availability, and excellent machinability. For hydrogen environments (some battery chemistries off-gas), C10200 OFHC is recommended as it's oxygen-free and won't embrittle over time. Brass (C36000) is suitable for lower-current applications where cost outweighs conductivity requirements.

Tin plating or silver plating?

Tin plating suits most BESS installations—cost-effective, corrosion-resistant, and solderable for field repairs. Silver plating is preferable for high current (400A+) or frequent connect/disconnect cycles, offering approximately 30% lower contact resistance without forming insulating oxides. However, silver costs 5-8x more than tin and can migrate under DC bias (whisker growth).

Can you match our existing terminal design?

Yes. Provide your drawing or sample for manufacturability review. We quote within 24 hours and deliver first articles in 3-7 days. For informal designs, sketches with dimensions are sufficient for engineering.

What's the minimum order quantity?

1 piece for prototypes. Production MOQ is typically 100 pieces. Material cost drives pricing rather than machining, making smaller orders (50 pieces) only slightly more expensive per piece than larger quantities.

Do you test contact resistance?

Yes. Every production lot undergoes 4-wire Kelvin contact resistance testing on a sample basis (typically 5 pieces per 500-piece lot). Actual milliohm readings are reported on inspection documents. 100% testing is available upon request.

What's the typical lead time for 1,000 pieces?

10-15 days including plating. Copper bar stock is typically in stock, minimizing material lead times. Plating adds 2-3 days. Expedited processing is available for urgent requirements.

ট্যাগ:

Sinbo Precision Mechanical Co., Ltd.

সিএনসি যান্ত্রিক যন্ত্রাংশ

CNC বাঁক অংশ

CNC মিলিং যন্ত্রাংশ

সিএনসি মেশিনিং পরিষেবা

ঠান্ডা কাঠের যন্ত্রাংশ

CNC টার্নিং মিলিং পার্টস

সিএনসি অ্যালুমিনিয়াম যন্ত্রাংশ

CNC স্টেইনলেস স্টীল অংশ

CNC ব্রাস যন্ত্রাংশ

সিএনসি স্ট্যাম্পিং অংশ

প্লাস্টিকের যন্ত্রাংশ

নমন শীট মেটাল অংশ

অটো পার্টস

শক্তি সংগ্রহস্থল সংযোগকারী

কন্টাক্টর টার্মিনাল

ব্যাটারি টার্মিনাল সংযোগকারী

CNC ম্যানুফ্যাকচারিং সলিউশনস

সিএনসি যান্ত্রিক যন্ত্রাংশ

CNC বাঁক অংশ

CNC মিলিং যন্ত্রাংশ

সিএনসি মেশিনিং পরিষেবা

ঠান্ডা কাঠের যন্ত্রাংশ

CNC টার্নিং মিলিং পার্টস

সিএনসি অ্যালুমিনিয়াম যন্ত্রাংশ

CNC স্টেইনলেস স্টীল অংশ

CNC ব্রাস যন্ত্রাংশ

সিএনসি স্ট্যাম্পিং অংশ

প্লাস্টিকের যন্ত্রাংশ

নমন শীট মেটাল অংশ

অটো পার্টস

শক্তি সংগ্রহস্থল সংযোগকারী

কন্টাক্টর টার্মিনাল

ব্যাটারি টার্মিনাল সংযোগকারী

CNC ম্যানুফ্যাকচারিং সলিউশনস

পণ্যের বিবরণ

সিএনসি যান্ত্রিক যন্ত্রাংশ

CNC বাঁক অংশ

CNC মিলিং যন্ত্রাংশ

সিএনসি মেশিনিং পরিষেবা

ঠান্ডা কাঠের যন্ত্রাংশ

CNC টার্নিং মিলিং পার্টস

সিএনসি অ্যালুমিনিয়াম যন্ত্রাংশ

CNC স্টেইনলেস স্টীল অংশ

CNC ব্রাস যন্ত্রাংশ

সিএনসি স্ট্যাম্পিং অংশ

প্লাস্টিকের যন্ত্রাংশ

নমন শীট মেটাল অংশ

অটো পার্টস

শক্তি সংগ্রহস্থল সংযোগকারী

কন্টাক্টর টার্মিনাল

ব্যাটারি টার্মিনাল সংযোগকারী

CNC ম্যানুফ্যাকচারিং সলিউশনস

CNC Machined C11000 ETP Copper Battery Terminal Connector with Low Contact Resistance for BESS Energy Storage Systems